Name: Thermaltake V-Tubler PETG Tube 5/8” A 16mm OD 12mm L 500mm 4pcs CL-W065-PL16TR-AA1000786
Brand: Thermaltake
SKU: TUBE-THERMALTAKE-VTUBLER-4/PACK
Price: 79.00 MYR
Availability: OutOfStock

Thermaltake V-Tubler PETG Tube 5/8” A 16mm OD 12mm L 500mm 4pcs CL-W065-PL16TR-AA1000786

RM79.00 RM199.00 RM

Thermaltake V-Tubler PETG Tube 5/8” A 16mm OD 12mm L 500mm 4pcs CL-W065-PL16TR-AA1000786

Price	RM79.00 RM199.00 RM
Product SKU	TUBE-THERMALTAKE-VTUBLER-4/PACK
Brand	Thermaltake
Size (L x W x H)	54 cm x 10 cm x 5 cm
Availability	Out Of Stock

Product
Description
Reviews (0)
What's in the box

Description

Highlight
								A 16mm OD 12mm ID PET-G Water-Cooled Tube
Thicker Wall For Safer Operation
Superior Strength To Acrylic Tubing
Easy To Use

							

thermaltake v-tubler-03

Cautions

Thermaltake Recommends The Following Steps To Be Taken After Completing Your Water Loop Setup
It Is Strongly Recommended To Use Market Proven Pre-Mix Coolant, Such As Thermaltake Coolant 1000. It Offers Great Performance While Preventing The Entire Cooling System – Copper, Brass, Nickel, Aluminum, And Steel From Corrosion
Fill The Reservoir With Coolant And Cycle The Power On And Off Several Times While The Pump Pushing The Coolant Into The Loop
Do Not Let The Pump Run Dry, When There Is No Liquid Entering The Pump Turn Off Your Power Immediately
Fill The Reservoir To The Top As It Will Prevent Air From Going Into The Pump
If Necessary Tilt The System Slightly From Side To Side To Bleed The Air Out Of The Loop
Place Some Paper Towels Under Fittings And Joining Points To Test For Leaks
Run The Loop With The Fill Port Open For About 24 Hours To Completely Bleed The Air Out Of The Loop
Before Starting, Flush Out Your System Correctly To Prevent Any Coolant Or Unwanted Particles Sticking To Your Tubes, Radiators And Other Cooling Components
Coolant Might Fade Over Time