Name: Kingston HyperX Fury 16GB 2666 DDR4 2666MHz 1x16GB 288 pin Desktop Gaming RAM HX426C16FB/16 Intel XMP AMD Ryzen
Brand: Kingston
SKU: RAM-16GB-2666-HX426C16FB/16
Price: 939.00 MYR
Availability: InStock

Kingston HyperX Fury 16GB 2666 DDR4 2666MHz 1x16GB 288 pin Desktop Gaming RAM HX426C16FB/16 Intel XMP AMD Ryzen

RM939.00 RM999.00 RM

Kingston HyperX Fury 16GB 2666 DDR4 2666MHz 1x16GB 288 pin Desktop Gaming RAM HX426C16FB/16 Intel XMP AMD Ryzen

Price	RM939.00 RM999.00 RM
Product SKU	RAM-16GB-2666-HX426C16FB/16
Brand	Kingston
Size (L x W x H)	22 cm x 15 cm x 6 cm
Availability	1

Quantity

Product
Description
Reviews (0)
What's in the box

Description

Highlight
								Life Time Warranty 
Gaming Desktop Ram 
Easy to install - plug-and-play functionality
Automatic overclocking - reach faster speeds and higher capacities just by installing the memory, no adjustments in BIOS needed
Cost-efficient - the perfect combination of price and DDR4 performance
Unique - asymmetrical, signature FURY heat spreader
Design - low profile, black heat spreader color and matching PCB
Reliable - 100% factory tested
Compatible - tested with all popular brands of motherboards
Guaranteed - lifetime warranty, free technical support

							

DESCRIPTION

HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

SPECIFICATIONS

CL(IDD)	16 cycles
Row Cycle Time (tRCmin)	45.75ns(min.)
Refresh to Active/Refresh (tRFCmin)	350ns(min.) Command Time
Row Active Time (tRASmin)	29.25ns(min.)
Maximum Operating Power	TBD W*
UL Rating	94 V - 0
Operating Temperature	0o C to +85o C
Storage Temperature	55o C to +100o C

*Power will vary depending on the SDRAM used.

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical • VPP - 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• Height 1.340” (34.04mm), w/o heatsink