Kingston HyperX Fury 16GB DDR4 3200 CL 18 288-Pin UDIMM Gaming RAM BLACK HX432C18FB/16

Extreme Performance Memory for Overclocking and Gaming Enthusiasts

Specifically engineered and tested for hyperX-entended speeds and system overclocking. Kingston HyperX memory is designed based on the latest memory specifications to deliver ultra performance for PC gaming. Using only the best components, Kingston designs and builds its HyperX high performance memory with efficient cooling to optimize your system. HyperX - the choice for the serious gamers.

• 100% tested for maximum performance
• Aluminum heatspreader for thermal diffusion 
• Free technical support

*All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.

DESCRIPTION

HyperX HX432C18FB/16 is a 2G x 64-bit (16GB) DDR4-3200 CL18 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 18-21-21 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: 

JEDEC/XMP TIMING PARAMETERS

• JEDEC/PnP: DDR4-3200 CL18-21-21 @1.2V
• XMP Profile #1: DDR4-3200 CL18-21-21 @1.2V
• XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V

​SPECIFICATIONS

• CL(IDD) ► 18 cycles
• Row Cycle Time (tRCmin) ► 45.75ns(min.)
• Refresh to Active/Refresh Command Time (tRFCmin) ► 350ns(min.)
• Row Active Time (tRASmin) ► 24.375ns(min.)
• Maximum Operating Power ► TBD W*
• UL Rating ► 94 V - 0
• Operating Temperature ► 0º C to +85º C 
• Storage Temperature ► -55º C to +100º C

*Power will vary depending on the SDRAM used.

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.340” (34.04mm), w/heatsink

​